亚洲中文字幕在线精品2021_久久99久久精品久久久久久_一级毛片在线免费播放_国色天香综合久久

01. The special design of the oil system, good stability, stable conversion, low failure rate, reliable, and guaranteedquality.
02. The high-precision steel structure of the access template is ground and nitrided to achieve a high-precisionplatform surface.
03. Accurate and safe positioning of the mold in and out, ensure that the mold is not damaged.
04. lt is suitable for various two-laver or multi-laver molds, and has rapid production capacity.

01. The special design of the oil system, good stability, stable conversion, low failure rate, reliable, and guaranteedquality.
02. The high-precision steel structure of the access template is ground and nitrided to achieve a high-precisionplatform surface.
03. Accurate and safe positioning of the mold in and out, ensure that the mold is not damaged.
04. lt is suitable for various two-layer or multi-layer molds, and has rapid production capacity.

01. Double proportional oil system design, good stability, stable conversion, low failure rate, reliable, easy to use and safe.
02. The high-precision steel structure of the access template is ground and nitrided to achieve a high-precisionplatform surface.
03. The body of the whole equipment has sufficient rigidity, wear resistance, good guiding accuracy and stability
04. Vacuum pump, 2xZ-15D-15L/$; Vacuum degree up to <0.1., Suitable for various two-layer or multi-layer moldswith express delivery capacity

01. Using a linear reciprocating, plug, pump with forced feed, bidirectional discharge is uniform and stable.
02. lt has the function of automatic oll replenishment for the closed oll circuit of the synchronous oil cylinder to ensure the accurate ratio of the two groups of rubber.
03. Advanced mixing, device, good mixing effect, small volume, no dead angle in the intemal flow channel.
04. 20L and 200L barrels are shared.

01. Double proportional oil system design, good stability, stable conversion, low failure rate, reliable, easy to use andsafe.
02. The body of the whole equipment has suficient rigidity, wear resistance, good guiding accuracy and stability.
03. Cooperate with the injection device to realize four-stage injection speed and injection pressure, and three-stage holding pressure.
04. lt can meet the requirements of different rubber materials for injection conditions and has rapid production capacity.
05. Equipped with a mobile die-casting material chamber to effectively prevent scorching of rubber.

01. double proportional oil system design, good stability, stable conversion, low failure rate, reliable, easy to use and safe.
02. The body of the whole equipment has suficient rigidity, wear resistance, good guiding accuracy and stability.
03. Cooperate with the injection device to realize four-stage injection speed and injection pressure, and three-stage holding pressure.
04. it can meet the requirements of different rubber materials for injection conditions and has rapid production capacity.

01.double proportional oil system design, good stability, stable conversion, low failure rate, reliable, easy to use and safe.
02.The body of the whole equipment has suficient rigidity, wear resistance, good guiding accuracy and stability.
03.Cooperate with the injection device to realize four-stage injection speed and injection pressure, and three-stage holding pressure.
04. it can meet the requirements of different rubber materials for injection conditions and has rapid production capacity.

01. One iniection machine is equipped with eight vulcanization units, which can realize simultaneous vulcanization of multiple machines. Eight sets of vulcanization units share a set of mold openings, take product stations, and realize automatic conversion between stations with conveyor trolleys.
02. The entire production line realizes automatic feeding, metering, injection, conversion of eight sets of molds, and complete automation of mold opening and product taking.

01. Double proportional oil system design, good stability, stable conversion, low failure rate, reliable, easy to use andsafe.
02. The whole machine body has suficient rigidity, wear resistance, good guiding accuracy and stability.
03. Cooperate with the injection device to realize four-stage injection speed and injection pressure, and three-stageholding pressure.
04. lt can meet the requirements of different rubber materials for iniection conditions and has rapid productioncapacity.

SUITABLE PRODUCTRailway Insulator      Pillar Insulator       Var...

01. Adopts C-frame with open mold clamping structure on both sides and full flow-in and full-out injection devicewithout check valve, the measurement is more accurate; the production process will not produce aging glue, noneed to fight The material head is more material-saving and more efficient. it is the best production equipment foiall kinds of seals and excuses or joints

01.The pedestal adopts the special mechanics design, the flatness is better, the product quality is better.
02. Special two-stage feeding design makes raw materials get better exhaust effect, to prevent the occurrence of cinker.
03.The adoption of high precision electronic ruler design can accurately control the size of injection.
04.The adoption of full-scale oil system, low noise and the automatic adjustment of the pressure ratio of the function areaccurate and stable.
05.The machine adopts three-step clamping mode, the height of the ground is 1.25 meters from the worktable, whichsaves space and is convenient to operate.

01. Adopting the horizontal advanced injection structure, the injection force is stable and reliable.
02.Super large-capacity feeding structure, automatically selectable feeding barrel, saving time and material,suitable for the rapid replacement of different colour performance rubber production.
03. The injection plunger can be moved outside the injection barrel for maintenance and replacement is convenientand fast.
04. Adopt a synchronous lifting mold lifting mechanism, which is stable and reliable.05. Hot plate heating is controlled by zones, the temperature is more uniform: fully enclosed safety baffle andgrating,higher equipment operation safety level.06. The first-in-first-out injection structure adopts advanced European and American design concepts. The injectionforce is stable and reliable.

01.a new vacuuminiection method;
02.enhance the density of rubber products, reduce the defect rate, save raw materials;
03.reduce heat loss, shorten the vulcanization time, save resources.